Pinpoint Test Bn : Pinpoint Test Bn: The Digital Speedometer Display Is Inoperative
- BN1 VERIFY THE IPC IS SET TO DISPLAY THE DIGITAL SPEEDOMETER
- Ignition ON.
-
NOTE: The IPC and message center navigation can be found in the Owner's Literature.
Using the message center controls, make sure the IPC is set to display the digital speedometer.
Yes GO to BN2. No The digital speedometer display is operating correctly. The IPC was not set to the correct display screen.
- BN2 CHECK THE ANALOG SPEEDOMETER OPERATION
- Verify the analog speedometer operates.
Does the analog speedometer operate?
Yes Refer to IPC Hardware Testing . No GO to Pinpoint Test F .