Symptom Chart - Warning Chimes
| Condition | Possible Sources | Action |
|---|---|---|
| All the chimes are inoperative | IPC | VERIFY the IPC gauges and indicators are functioning correctly. If the IPC gauges and indicators are not functioning correctly, GO to Pinpoint Test A . If the IPC gauges and indicators are functioning correctly, Refer to IPC Hardware Testing . |
| The chime always sounds | Refer to the Diagnostic Routine | GO to Pinpoint Test AL |
| The adaptive cruise control warning chime is inoperative | Cruise control system IPC |
VERIFY the adaptive cruise control display functions in the message center when the adaptive cruise control is in operation. If the adaptive cruise control display functions correctly, Refer to IPC Hardware Testing . If the adaptive cruise control display does not operate, REFER to SYMPTOM CHART - Information And Message Center to diagnose the adaptive cruise control gap and speed settings are never displayed symptom. |
| The air bag secondary warning chime is inoperative/has activated | IPC | RETRIEVE the recorded DTCs from the IPC self-test. If IPC DTC P1534:01 is not present, the system is operating correctly. The air bag secondary warning chime sounds only when a fault in the air bag warning indicator is present and DTC P1534:01 is recorded. If IPC DTC P1534:01 is present, Refer to IPC Hardware Testing . |
| The Belt-Minder® feature does not operate correctly | Refer to the Diagnostic Routine | GO to Pinpoint Test AS . |
| The BLIS® /CTA chime is inoperative | Refer to the Diagnostic Routine | GO to Pinpoint Test AM . |
| The door ajar warning chime is inoperative | Door ajar indication concern BCM IPC |
VERIFY the safety belt warning chime operates for 6 seconds following ignition ON. If the safety belt warning chime sounds, GO to Pinpoint Test AC to diagnose the door ajar message center warning indicator. If the safety belt warning chime does not sound, Refer to IPC Hardware Testing . |
| The headlamps on warning chime is inoperative | Refer to the Diagnostic Routine | GO to Pinpoint Test AN . |
| The key-in-ignition warning chime is inoperative | Refer to the Diagnostic Routine | GO to Pinpoint Test AO . |
| The lane keeping aid warning chime is inoperative | Refer to the Diagnostic Routine | GO to Pinpoint Test AP . |
| The lane keeping aid warning chime sounds with the hands on the steering wheel | Road conditions | Certain road conditions could lead to false activation of the chime. REFER to Lane Keeping System . |
| The memory-stored feedback chime is inoperative | Refer to the Diagnostic Routine | GO to Pinpoint Test AQ . |
| The message center warning chime is inoperative | IPC | DISCONNECT the brake fluid level switch and VERIFY that the message center warning chime sounds when the message center displays CHECK BRAKE SYSTEM. If the message center warning chime sounds when the CHECK BRAKE SYSTEM message appears, the system is operating correctly at this time. The message center warning chime only sounds when the message center displays a new warning message. If the message center warning chime does not sound when the CHECK BRAKE SYSTEM message appears, Refer to IPC Hardware Testing . |
| The parking brake warning chime is inoperative | Refer to the Diagnostic Routine | GO to Pinpoint Test AR . |
| The perimeter alarm warning chime is inoperative | Perimeter alarm concern IPC |
VERIFY the perimeter alarm functions correctly and the headlamps on warning chime operates with the headlamps on, ignition OFF and the driver door open. If the perimeter alarm functions correctly and the headlamps on warning chime sounds, REFER to Anti-Theft Perimeter to diagnose the perimeter alarm. If the perimeter alarm functions correctly and the headlamps on warning chime does not sound, Refer to IPC Hardware Testing . If the perimeter alarm does not operate correctly, REFER to Anti-Theft Perimeter . |
| The safety belt warning chime does not operate correctly | Refer to the Diagnostic Routine | GO to Pinpoint Test AS . |
| The service AdvanceTrac® warning chime is inoperative | Stabilty-traction control indication concern IPC |
VERIFY the headlamps on warning chime operates with the headlamps on, ignition OFF and the driver door open. If the headlamps on warning chime sounds, GO to Pinpoint Test O to diagnose the stability-traction control indicator (sliding car icon). If the headlamps on warning chime does not sound, Refer to IPC Hardware Testing . |
| The turn/hazard on warning chime is inoperative | Refer to the Diagnostic Routine | GO to Pinpoint Test AT . |
| The turn signal left on warning chime is inoperative | Refer to the Diagnostic Routine | GO to Pinpoint Test AU . |