LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2016 >> MKS Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, And Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test D : The Temperature Gauge Is Inoperative >> Pinpoint Test D : The Temperature Gauge Is Inoperative

Pinpoint Test D : The Temperature Gauge Is Inoperative

  1. D1 RETRIEVE THE RECORDED DTCs FROM THE PCM KOEO SELF-TEST

    • Ignition ON.
    • Using a scan tool, perform the PCM Key ON Engine OFF (KOEO) self-test.

    Are any DTCs recorded? 

    Yes  REFER to ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID)
    No  GO to  D2.

  2. D2 RETRIEVE THE RECORDED DTCs FROM THE IPC SELF-TEST

    • Using a scan tool, perform the IPC self-test.

    Are any DTCs recorded? 

    Yes  For DTC U0100:00, GO to Pinpoint Test AV . For all other DTCs, REFER to DTC CHART - IPC 
    No  GO to  D3.

  3. D3 CARRY OUT THE TEMPERATURE GAUGE ACTIVE COMMAND USING THE SCAN TOOL

    • Using a scan tool, view the IPC PIDs.
    • NOTE: Make sure to set the scan tool to 0 or full cold before beginning this step.

      Select the IPC temperature gauge (ENGCOOLNT) PID.

    • Command the temperature gauge on and off while monitoring the gauge.

    Does the temperature gauge start at cold (C), move to full hot (H) and return to cold (C)? 

    Yes  INSTALL a new PCM. REFER to Electronic Engine Controls .
    No  Refer to IPC Hardware Testing .
scientia non olet · About LEMON Manuals