Intermediate Shaft Seal and Deflector: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
For information on Ford Color Coded Illustrations refer to COLOR-CODING - FORD
.
Special Tool(s)
| Handle, Driver (32 in) 205-907 | |
| Installer, PTU Linkshaft Seal 205-883 | |
| Installer, Front Axle Bushing 205-346 | |
| Remover, Halfshaft 205-241 | |
| Remover, Transfer Case Bearing Cup 308-125 (T87P-7120-D) | |
| Slide Hammer Master Set 100-D112 |
General Equipment
| 16 mm (5/8 in) washer (used with 308-125) |
Material
| Item | Specification |
| Motorcraft ® MERCON ® V Automatic Transmission Fluid XT-5-QMC (US); CXT-5-LM12 (Canada) | MERCON ® V |
| Motorcraft ® Metal Brake Parts Cleaner (US) / Motorcraft ® Brake Parts Cleaner (Canada) PM-4-A or PM-4-B (US); CPM-4 (Canada) | - |
| Motorcraft ® MERCON ® LV Automatic Transmission Fluid XT-10-QLVC (US); CXT-10-LV12 (Canada) | MERCON ® LV |
| Motorcraft ® Silicone Brake Caliper Grease and Dielectric Compound XG-3-A | ESE-M1C171-A |