Instrument Panel Upper Section - RH
NOTE:
For information on Ford Color Coded Illustrations refer to COLOR-CODING - FORD
.
- 1.
Remove the passenger air bag module. For additional information, refer to Supplemental Restraint System .
- 2.
Remove the 4 instrument top panel-to-instrument panel screws from the back side of the instrument panel.
- 3.
Remove the RH instrument trim panel. For additional information, refer to Instrument Panel - Exploded View .
- 4.
Remove the RH vent register. For additional information, refer to Climate Control .
- 5.
Remove the Front Controls Interface Module (FCIM) and instrument panel speaker. For additional information, refer to Information and Entertainment Systems .
- 6.
Remove the screw from the lower left corner of the RH instrument panel top cover.- To install, tighten to 3 Nm (27 lb-in).
- 7.
Remove the screw from the lower right side of the RH instrument panel top cover.- To install, tighten to 3 Nm (27 lb-in).