Instrument Cluster Finish Panel

NOTE: For information on Ford Color Coded Illustrations refer to COLOR-CODING - FORD .

All vehicles

1.

Lower the steering column to the full down position.

2.

Remove the steering column opening trim panel.
- Remove the 2 steering column opening trim panel screws.
- Disengage the steering column opening trim panel from the retainers.
- Disconnect the electrical connector and aspirator hose, if equipped.

GFD99440

Courtesy of FORD MOTOR COMPANY

3.

Remove the 2 instrument cluster finish panel screws.

GFD100547

Courtesy of FORD MOTOR COMPANY

4.

Disengage the instrument cluster finish panel from the retaining clips and remove the panel.
- Disconnect the electrical connectors, if equipped.

5.

To install, reverse the removal procedure.