Pinpoint Test Aw: DTC U0154:00: Notes

Pinpoint Test AW: DTC U0154:00 

Normal Operation 

• DTC U0154:00 (Lost Communication With Occupant Classification Sensor [OCS ]: No Sub-Type Information) - sets in the Instrument Panel Cluster (IPC) if data messages received from the Occupant Classification System Module (OCSM) over the High Speed Controller Area Network (HS-CAN) are missing for 5 seconds or more. For a complete list of all network messages, refer to Module Communications Network .

This pinpoint test is intended to diagnose the following: 

• OCSM
• IPC