Pinpoint Test As: DTC U0104:00: Notes

Pinpoint Test AS: DTC U0104:00 

Normal Operation 

• DTC U0104:00 (Lost Communication With Cruise Control Module: No Sub-Type Information) - sets in the Instrument Panel Cluster (IPC) if data messages received from the Cruise-Control Module (C-CM) over the High Speed Controller Area Network (HS-CAN) are missing for 5 seconds or more. For a complete list of all network messages, refer to Module Communications Network .

This pinpoint test is intended to diagnose the following: 

• C-CM
• IPC