LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2015 >> MKX AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, And Warning Chimes >> Description And Operation >> Information And Message Center >> System Warning Messages

System Warning Messages

The system warning messages alert the operator to possible problems or malfunctions in the vehicle operating systems. System warning messages may be stand-alone messages but are often associated with another form of indication such as a gauge, an indicator or message center indicator. The message center displays the last selected feature if there are no additional warning messages. Once a warning message has been displayed, the message must be acknowledged to allow full functionality of the message center. Press the OK button to acknowledge and clear the warning message.

When the Instrument Panel Cluster (IPC) receives a request to display an informational warning message or a fault condition warning message, the message center may display one of the following warning messages:

Body 

The body warning messages are as follows:

Chassis 

The chassis warning messages are as follows:

Powertrain 

The general powertrain warning messages are as follows:

The Four-Wheel Drive (4WD) warning messages are as follows:

Intelligent Access (IA) 

The message center displays warning messages indicating the status of the IA system. The displayed messages are as follows:

MyKey® 

The message center displays warning messages indicating the status of the MyKey® system. The displayed messages are as follows:

Forward Collision Warning (If Equipped) 

The message center displays warning messages indicating the status of the forward collision warning system. The displayed messages are as follows:

Adaptive Cruise Control 

The message center displays messages and warning messages indicating the status of the adaptive cruise control system. The displayed messages are as follows:

Blind Spot Information System (BLIS®) /Cross Traffic Alert (CTA) 

The message center displays warning messages indicating the status of the BLIS® /CTA system. The displayed messages are as follows:

Service Procedure Displays 

In addition to the warning messages, the message center provides messages displayed during repair procedures to indicate certain states of a procedure. The following are the service repair procedures displayed in the message center.

Compass Zone and Calibration (Base IPC Only)