LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2014 >> Navigator Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, And Warning Chimes >> General Procedures >> Compass Calibration - With Message Center

Compass Calibration - With Message Center

  1. NOTE:  For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential electrical accessories (heated rear window, heater, A/C, map lamps, wiper, etc.) and make sure all the doors are closed.

    Start the vehicle.

  2. Press the message center SETUP button until RESET FOR CALIBRATION is displayed.
  3. NOTE:  The message center displays CIRCLE SLOWLY TO CALIBRATE in the calibration function.

    Press the RESET control button to start the compass calibration function.

  4. NOTE:  This step may require up to 5 circles to complete the calibration.
NOTE: If the RESET button is pressed during the calibration or 3 minutes has elapsed since the beginning of the calibration without driving the vehicle, the message center reverts back to normal operation and the INFO displays CAL until a successful calibration is carried out.

Slowly drive the vehicle in a circle at less than 5 km/h (3 mph) until the CIRCLE SLOWLY TO CALIBRATE display changes to CALIBRATION COMPLETED.