LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2014 >> MKT Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, And Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test V: The MIL Is Never Or Always On >> Pinpoint Test V: The Mil Is Never Or Always On

Pinpoint Test V: The Mil Is Never Or Always On

  1. V1 RETRIEVE THE RECORDED DTCs FROM THE IPC SELF-TEST 
    • Ignition ON.
    • Using a scan tool, perform the IPC self-test.

    Are any DTCs recorded? 

    1. Yes  : For DTC U0100:00, GO to PINPOINT TEST AV .

      For all other DTCs, REFER to DTC CHART - IPC .

    2. No  : GO to V2  .
  2. V2 RETRIEVE THE RECORDED DTCs FROM THE PCM KOEO SELF-TEST 
    • Using a scan tool, perform the KOEO self-test.

    Are any DTCs recorded? 

    1. Yes  : DIAGNOSE all PCM DTCs first. REFER to ELECTRIC ENGINE CONTROLS or ENGINE CONTROLS - SYMPTOM CHARTS (EXCEPT DIESEL & HYBRID) (SECTION 3) .
    2. No  : GO to V3  .
  3. V3 CARRY OUT THE IPC WARNING LAMPS AND CHIME ACTIVE COMMAND USING THE SCAN TOOL 
    • Using a scan tool, view the IPC PIDs.
    • Select the IPC MIL (MIL_LAMP) PID.
    • Command the MIL on and off while observing the MIL.

    Does the MIL illuminate when selected on and turn off when selected off? 

    1. Yes  : If the MIL is never on, the system is operating correctly.

      If the MIL is always on, INSTALL a new PCM. REFER to ELECTRIC ENGINE CONTROLS .

    2. No  : INSTALL a new IPC. REFER to INSTRUMENT PANEL CLUSTER (IPC) .
scientia non olet · About LEMON Manuals