LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2014 >> MKT Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, And Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test AO: The Key-In-Ignition Warning Chime Is Inoperative >> Pinpoint Test AO: The Key-In-Ignition Warning Chime Is Inoperative

Pinpoint Test AO: The Key-In-Ignition Warning Chime Is Inoperative

  1. AO1 CHECK THE SAFETY BELT WARNING CHIME OPERATION 
    • Ignition OFF.
    • Ignition ON.
    • Monitor the safety belt warning chime when the ignition is transitioned from OFF to RUN.

    Does the safety belt warning chime operate for approximately 6 seconds? 

    1. Yes  : GO to AO2  .
    2. No  : INSTALL a new IPC. REFER to INSTRUMENT PANEL CLUSTER (IPC) . TEST the system for normal operation.
  2. AO2 CHECK THE INTERIOR LAMPS OPERATION 
    • Open and close the driver door.
    • Observe the interior lamps.

    Do the interior lamps operate correctly from the driver door? 

    1. Yes  : GO to AO3  .
    2. No  : REFER to INTERIOR LIGHTING .
  3. AO3 RETRIEVE THE RECORDED DTCs FROM THE BCM SELF-TEST 
    • Ignition ON.
    • Using a scan tool, perform the BCM self-test.

    Are any DTCs present? 

    1. Yes  : REFER to the BCM DTC Chart in MULTIFUNCTION ELECTRONIC MODULES .
    2. No  : INSTALL a new IPC. REFER to INSTRUMENT PANEL CLUSTER (IPC) .
scientia non olet · About LEMON Manuals