LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2013 >> Navigator L, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Transfer Case) >> In-Vehicle Repair >> Transfer Case Rear Output Shaft Seal >> Removal

Transfer Case Rear Output Shaft Seal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the rear driveshaft. For additional information, refer to DRIVESHAFT .
  3. Using a suitable seal puller, remove the rear output shaft seal.
    Fig 1: Locating Rear Output Shaft Seal
    G06128036Courtesy of FORD MOTOR CO.