Symptom Chart - Warning Chimes

SYMPTOM CHART - WARNING CHIMES

Condition	Possible Sources	Action
All chimes are inoperative	IC	INSTALL a new IC. REFER to Instrument Cluster (IC) . TEST the system for normal operation.
The chime sounds when the driver door is ajar (no key in ignition and headlamps off)	Wiring, terminals or connectors Ignition switch SJB	GO to Pinpoint Test AN .
The air bag warning chime is inoperative	IC RCM	VERIFY DTC B1868 is present in the IC. If DTC B1868 is not present, the system is operating normally. If DTC B1868 is present, INSTALL a new IC. REFER to Instrument Cluster (IC) . TEST the system for normal operation.
The key-in-ignition warning chime is inoperative	Wiring, terminals or connectors Key-in-ignition switch (part of the ignition switch)	GO to Pinpoint Test AO .
	SJB
The turn signal left on warning chime is inoperative	IC	VERIFY the turn signal indicators and speedometer operate correctly. If the turn signal indicators or speedometer do not operate correctly, GO to Pinpoint Test N (LH/RH turn indicators) or GO to Pinpoint Test F (speedometer). If the turn signal indicators and speedometer operate correctly, INSTALL a new IC. REFER to Instrument Cluster (IC) . TEST the system for normal operation.
The door ajar warning chime is inoperative	IC	VERIFY the door ajar message center indicator operates correctly. If the door ajar message center indicator does not operate correctly, GO to Pinpoint Test AE . If the door ajar message center indicator operates correctly, INSTALL a new IC. REFER to Instrument Cluster (IC) . TEST the system for normal operation.
The turn signal tick-tock chime is inoperative	IC	VERIFY the turn signal indicators operate correctly. If the turn signal indicators do not operate correctly, GO to Pinpoint Test N . If the turn signal indicators operate correctly, INSTALL a new IC. REFER to Instrument Cluster (IC) . TEST the system for normal operation.
The headlamps on warning chime is inoperative	Door ajar indication concern Headlamp concern SJB IC	GO to Pinpoint Test AP .
The message center warning chime is inoperative	IC	VERIFY the message center operates correctly. If the message center does not operate correctly, GO to Pinpoint Test AF . If the message center operates correctly, INSTALL a new IC. REFER to Instrument Cluster (IC) . TEST the system for normal operation.
The parking brake on warning chime is inoperative	IC	VERIFY the brake warning indicator and the speedometer operate correctly. If the brake warning indicator and the speedometer do not operate correctly, GO to Pinpoint Test O (brake warning indicator) or GO to Pinpoint Test F (speedometer). If the brake warning indicator and the speedometer operate correctly, INSTALL a new IC. REFER to Instrument Cluster (IC) . TEST the system for normal operation.
The perimeter alarm warning chime is inoperative	Perimeter alarm concern IC	VERIFY the key-in-ignition warning chime functions correctly.
		If the key-in-ignition warning chime does not function correctly, GO to Pinpoint Test AO . If the key-in-ignition warning chimes functions correctly, REFER to ANTI-THEFT - PERIMETER to diagnose the perimeter alarm.
The safety belt warning chime is inoperative	Safety belt warning indication concern Speedometer concern IC	GO to Pinpoint Test AQ .
The Belt-Minder® feature is not operating correctly	Belt-Minder® deactivated Safety belt warning indication concern Speedometer concern RCM	GO to Pinpoint Test AQ .