LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2013 >> Navigator Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, And Warning Chimes >> General Procedures >> Message Center Configuration >> Oil Life Reset - Base Instrument Cluster (IC)

Oil Life Reset - Base Instrument Cluster (IC)

NOTE: All message center functions are carried out using the single stem reset button in the Instrument Cluster (IC).
NOTE: The oil life calculation is set at a maximum of approximately 12, 070 km (7, 500 miles) or 180 days.
NOTE: The XX's in the message center displays below represent a numeric value. For example, the message center may display OIL LIFE = 80%.
  1. Press and release the reset button to scroll through the information displays until the message center displays HOLD RESET FOR SETUP MENU.
  2. Press and hold the reset button for approximately 2 seconds until the message center displays HOLD RESET FOR SYSTEM CHECK.
  3. Press and release the reset button until the message center displays OIL LIFE = XXX% HOLD RESET = NEW.
  4. Press and hold the RESET button for 2 seconds and release when the message center displays OIL LIFE SET TO 100%.
  5. Press and release the reset button to exit the procedure.