Pinpoint Test H: The Odometer Is Inoperative
- H1 RETRIEVE THE RECORDED DTCs FROM THE PCM KOEO SELF-TEST
- Ignition ON.
- Using a scan tool, perform the PCM KOEO self-test.
- Are any DTCs recorded?
- Yes : REFER to ENGINE CONTROLS - SYMPTOM CHARTS (EXCEPT DIESEL & HYBRID) (SECTION 3) .
- No : GO to H2.
- H2 CHECK FOR CORRUPTED NVM
- Observe the message center display area.
- Does the odometer display ERROR?
- Yes : INSTALL a new IPC. REFER to INSTRUMENT PANEL CLUSTER (IPC) .
- No : GO to H3.
- H3 RETRIEVE THE RECORDED DTCs FROM THE IPC SELF-TEST
- Using a scan tool, perform the IPC self-test.
- Are any DTCs recorded?
- Yes
: For DTC U0100:00, GO to PINPOINT TEST AV .
For all other DTCs, REFER to DTC Chart - IPC .
- No : INSTALL a new IPC. REFER to INSTRUMENT PANEL CLUSTER (IPC) .