LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2013 >> MKT Base, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Power Brake Actuation - Brake Booster >> Removal And Installation >> Brake Vacuum Pump - 2.0L GTDI >> Removal and Installation

Removal and Installation

NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the air cleaner outlet pipe. For additional information, refer to INTAKE AIR DISTRIBUTION SYSTEM & INTAKE AIR FILTERING SYSTEM -- MKT .
  2. G08028122
    • To install, tighten to 10 Nm (89 lb-in).
      G08028123
  4. Inspect and, if necessary, install a new brake vacuum pump gasket.
    G08028124
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals