LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2013 >> MKT Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, And Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test AT: The Turn Signal/Hazard On Warning Chime Is Inoperative >> Pinpoint Test At: The Turn Signal/Hazard On Warning Chime Is Inoperative

Pinpoint Test At: The Turn Signal/Hazard On Warning Chime Is Inoperative

  1. AT1 CHECK THE SAFETY BELT WARNING CHIME OPERATION 
    • Ignition OFF.
    • Ignition ON.
    • Monitor the safety belt warning chime when the ignition switch is transitioned from OFF to RUN for 6 seconds.
    • Does the safety belt warning chime operate for approximately 6 seconds? 
    1. Yes  : GO to AT2.
    2. No  : INSTALL a new IPC. REFER to INSTRUMENT PANEL CLUSTER (IPC) .
  2. AT2 CHECK THE TURN SIGNAL INDICATOR OPERATION 
    • Ignition ON.
    • Verify the RH and LH turn signal indicators operate correctly.
    • Do the turn signal indicators operate correctly? 
    1. Yes  : GO to AT3.
    2. No  : GO to PINPOINT TEST S .
  3. AT3 RETRIEVE THE RECORDED DTCs FROM THE BCM SELF-TEST 
    • Ignition ON.
    • Using a scan tool, perform the BCM self-test.
    • Are any DTCs present? 
    1. Yes  : REFER to the BCM DTC Chart in BODY CONTROL MODULE (BCM) .
    2. No  : INSTALL a new IPC. REFER to INSTRUMENT PANEL CLUSTER (IPC) .
scientia non olet · About LEMON Manuals