Network Message Chart
WARNING: This page is about a different car, the 2016 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
PAM Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Power mode | BCM | Used to command ignition position. |
| Parking aid enable status | IPC | Used to enable or disable the rear parking aid. |
| Reverse gear | PCM | Used to enable rear parking aid when the transmission is in REVERSE (manual transmission vehicles). |
| Selector lever (PRNDL) status | TCM | Used to enable rear parking aid when the transmission selector is in REVERSE (automatic transmission vehicles). |
| Vehicle speed | ABS | Used to disable the parking aid if the vehicle speed exceeds a preset threshold. |
ACM Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Tone request | PAM | Used to command audible parking aid tones through the front and/or rear speakers. |