Pinpoint Test I : U3003:62: Notes
WARNING: This page is about a different car, the 2015 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U3003:62 | Battery Voltage: Signal Compare Failure | A continuous and on-demand DTC that sets when the vehicle voltage message sent from the BCM varies by more than 2 volts from the actual voltage measured by the PAM. |
Possible Sources
- Wiring, terminals or and related in-line connectors
- PAM