Pinpoint Test D : The Active Park Assist System Does Not Activate When The Active Park Assist Switch Is Pressed: Notes
WARNING: This page is about a different car, the 2015 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
The Active Park Assist System Does Not Activate When The Active Park Assist Switch Is Pressed
Refer to Wiring Diagrams PARKING AID for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B129E:11 | Enable/Disable Switch - Semi-Automatic Advanced Parallel Park: Circuit Short To Ground | A continuous and on-demand DTC that sets when the PAM detects a stuck closed active park assist switch or a short to ground on the active park assist switch input circuit. |
Possible Causes
- Wiring, terminals or connectors
- Communication network concern
- Active park assist switch (also known as instrument console switch assembly)
- PAM