3rd-4th Gear Synchronizer: Notes
WARNING: This page is about a different car, the 2015 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For information on Ford Color Coded Illustrations refer to COLOR-CODING - FORD
.
Special Tool(s) / General Equipment
| 205-068 Installer, Drive Pinion Bearing | |
| 205-115 Installer, Drive Pinion Seal TKIT-2000-F/FM/FLM | |
| 205-295 Remover, Bearing (Main Tool) | |
| 205-329 Mounting Bracket, Engine/Differential | |
| 303-435 Mounting Stand | |
| 303-435-06 Mounting Bracket for 303-435 | |
| 308-044 Installer, Transmission Extension Housing Bushing/Seal | |
| 308-195 Collet for 205-295 | |
| 308-208 Remover, Halfshaft Seal | |
| 308-214 Remover, Hydraulic Line Spring Clip | |
| 308-230 Support Plate, Gear Removal (Dia 85.1 mm) | |
| Hydraulic Press | |
| Vise Jaw Protectors | |
Materials
| Name | Specification |
|---|---|
| Gasket Maker TA-16 | WSK-M2G348-A5 |
| Motorcraft ® Dual Clutch Transmission Fluid XT-11-QDC | WSS-M2C200-D2 |