LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2013 >> MKS Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 436 (Parking Aid - Vehicles With: Rear Parking Aid (Except Electric Vehicle)) >> Description And Operation >> Parking Aid - System Operation and Component Description >> Network Message Chart >> PAM Network Input Messages

PAM Network Input Messages

WARNING: This page is about a different car, the 2015 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Broadcast Message Originating Module Message Purpose
Power mode BCM Used to command ignition position.
Parking aid enable status IPC Used to enable or disable the rear parking aid.
Reverse gear PCM Used to enable rear parking aid when the transmission is in REVERSE (manual transmission vehicles).
Selector lever (PRNDL) status TCM Used to enable rear parking aid when the transmission selector is in REVERSE (automatic transmission vehicles).
Vehicle speed ABS Used to disable the parking aid if the vehicle speed exceeds a preset threshold.
scientia non olet · About LEMON Manuals