LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> Navigator 2WD V8-5.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair >> Accessory Drive Belt Tensioner

Accessory Drive Belt Tensioner




Accessory Drive Belt Tensioner

Removal and Installation

1. Rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt from the A/C compressor pulley.





2. Remove the 3 bolts and the accessory drive belt tensioner.
- To install, tighten to 25 Nm (18 lb-ft).


3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals