LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (OEM Connector Repair Procedures (Except Hybrid)) >> Connector Repair Procedures >> Restraint system terminals must not be removed or repaired >> Electrical short inside the harness

Electrical short inside the harness

WARNING: This page is about a different variant/trim than selected.
  1. = Solder coated wire to ground
  2. = Harness protective tape
  3. = Intermittent short

    Solder coated wire pierced through the insulation of another circuit.

  4. = Grounding foil
Fig 1: Identifying Electrical Short Inside Harness
G07922586Courtesy of FORD MOTOR CO.