LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> Engine Control Components >> Power Take-Off (PTO) Switch And Circuits >> PTO Circuits Description

PTO Circuits Description

WARNING: This page is about a different variant/trim than selected.

The 3 PTO input circuits are PTO mode, PTO engage, and PTO RPM.

The PTO engage circuit is used when the operator is requesting the PCM to check the needed inputs required to initiate the PTO engagement.

The PTO RPM circuit is used when the operator is requesting additional engine RPM for PTO operation.

scientia non olet · About LEMON Manuals