Manifold Absolute Pressure (MAP) Sensor

The MAP sensor measures intake manifold absolute pressure. The PCM uses information from the MAP sensor to measure how much exhaust gas is introduced into the intake manifold.

The MAP sensor for speed density control systems is centrally located on the intake manifold and measures the intake manifold pressure. The PCM uses this information to determine the speed density air charge and to provide input for various spark control functions. The MAP sensor for a speed density system is integrated with the IAT2 sensor.

Fig 1: Identifying Typical MAP Sensor

Courtesy of FORD MOTOR CO.

Fig 2: Identifying Typical MAP Sensor Integrated With IAT2 Sensor

Courtesy of FORD MOTOR CO.