Cold Start Variable Cam Timing (VCT) Monitor
WARNING: This page is about a different variant/trim than selected.
If the VCT cam phasing is used during a cold start to improve catalyst heating, the VCT system checks the functionality by monitoring the closed loop cam position error correction. If the correct cam position cannot be maintained and the system has an advance or retard error greater than the malfunction threshold, a cold start emission reduction VCT control malfunction is indicated.
- DTC: P052A Cold start camshaft position timing over-advanced (Bank 1)
- DTC: P052B Cold start camshaft timing over-retarded (Bank 1)
- DTC: P052C Cold start camshaft timing over-advanced (Bank 2)
- DTC: P052D Cold start camshaft timing over-retarded (Bank 2)
- Monitor execution: Continuous
- Monitor sequence: None
- Monitoring duration: 5 seconds