DTC P2163: Throttle/Pedal Position Sensor A Maximum Stop Performance
WARNING: This page is about a different variant/trim than selected.
P2163 - THROTTLE/PEDAL POSITION SENSOR A MAXIMUM STOP PERFORMANCE
| Description: The PCM monitors the electronic throttle for the ability of the throttle plate to reach the upper mechanical stop position within a calibrated amount of time at ignition ON. This DTC sets when the throttle plate does not reach the upper mechanical stop position within a calibrated amount of time. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Visually inspect the throttle plate for an obstruction. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DV . | ||