DTC P2091: B Camshaft Position Actuator Control Circuit High Bank 1
WARNING: This page is about a different variant/trim than selected.
P2091 - B CAMSHAFT POSITION ACTUATOR CONTROL CIRCUIT HIGH BANK 1
| Description: The PCM monitors the variable camshaft timing (VCT) circuit for high and low voltage. The test fails if the voltage exceeds a calibrated limit for a calibrated amount of time. | |||
Possible Causes:
|
|||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HK . | ||