DTC P1709: Park/Neutral Position (PNP) Switch Out Of Self-Test Range
WARNING: This page is about a different variant/trim than selected.
P1709 - PARK/NEUTRAL POSITION (PNP) SWITCH OUT OF SELF-TEST RANGE
| Description: This DTC indicates that the voltage is high when it should be low. Refer to the appropriate Automatic Transaxle/Transmission article. | |||
Possible Causes:
|
|||
| Diagnostic Aids: When activating either the PNP or CPP switch, the voltage should cycle from 5 volts to low. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||