DTC P1639: Vehicle Id (VID) Block Corrupted, Not Programmed
WARNING: This page is about a different variant/trim than selected.
P1639 - VEHICLE ID (VID) BLOCK CORRUPTED, NOT PROGRAMMED
| Description: This DTC indicates the VID block is not programmed or the information within is corrupt. | |||
Possible Causes:
|
|||
| Diagnostic Aids:
Program the PCM to the most recent calibration available. The VID block must be programmed. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Making Changes to the VID Block. |
|||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||