DTC P1115: Intake Air Temperature 2 (IAT2) Circuit High (Supercharged/Turbocharged Engines)
WARNING: This page is about a different variant/trim than selected.
P1115 - INTAKE AIR TEMPERATURE 2 (IAT2) CIRCUIT HIGH (SUPERCHARGED/TURBOCHARGED ENGINES)
| Description: This DTC sets when the sensor signal is greater than the self-test maximum which is 4.6 volts. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Monitor the IAT2 PID value. A typical IAT2 temperature should be greater than the IAT1 temperature. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DU . | ||