DTC P1101: Mass Air Flow (MAF) Sensor Out Of Self-Test Range
WARNING: This page is about a different variant/trim than selected.
P1101 - MASS AIR FLOW (MAF) SENSOR OUT OF SELF-TEST RANGE
| Description: This DTC sets if during ignition ON engine OFF, the output signal is greater than a calibrated limit or during ignition ON engine running, the output signal is not within the calibrated range. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Diagnose circuit faults prior to range or performance faults. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DC . | ||