DTC P1011: WASTEGATE Control Pressure Sensor Circuit Range/Performance
WARNING: This page is about a different variant/trim than selected.
P1011 - WASTEGATE CONTROL PRESSURE SENSOR CIRCUIT RANGE/PERFORMANCE
| Description: This DTC sets when the wastegate vacuum sensor reading has exceeded the atmospheric pressure by greater than a calibrated threshold and the fault timer has exceeded the calibrated time threshold. | |||
Possible Causes:
|
|||
| Diagnostic Aids: The typical maximum threshold is 10.16 kPa (1.47 psi) and time threshold is 5 seconds. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HN . | ||