DTC P0722: Output Shaft Speed (OSS) Sensor Circuit No Signal
WARNING: This page is about a different variant/trim than selected.
P0722 - OUTPUT SHAFT SPEED (OSS) SENSOR CIRCUIT NO SIGNAL
| Description: The OSS sensor failed to provide a signal to the PCM upon initial movement of vehicle. | |||
Possible Causes
:
|
|||
| Diagnostic Aids: Check the wiring, connector, and sensor for damage. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Manual Transmission | GO to PINPOINT TEST DP . | ||
| Automatic Transmission | Refer to the appropriate Automatic Transaxle/Transmission article, Diagnostic Trouble Code (DTC) Index to continue diagnosis. | ||