DTC P0444: Evaporative Emission System Purge Control Valve A Circuit Open
WARNING: This page is about a different variant/trim than selected.
P0444 - EVAPORATIVE EMISSION SYSTEM PURGE CONTROL VALVE A CIRCUIT OPEN
| Description: The PCM monitors the state of the EVAPCP circuit output driver. This DTC sets when the signal moves outside the minimum or maximum limit for the commanded state. | |||
Possible Causes:
|
|||
| Diagnostic Aids: To verify normal function, monitor the EVAPCP PID. With the valve closed, the EVAPCP indicates 0% duty cycle. When the valve is commanded fully open, the EVAPCP indicates 100% duty cycle. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HZ . | ||