DTC P0332: Knock Sensor 2 Circuit Low (Bank 2)
WARNING: This page is about a different variant/trim than selected.
P0332 - KNOCK SENSOR 2 CIRCUIT LOW (BANK 2)
| Description: The knock sensor (KS) detects vibrations upon increase and decrease in engine RPM. The KS generates a voltage based on this vibration. This DTC sets if the voltage goes outside a calibrated level. | |||
Possible Causes:
|
|||
| Diagnostic Aids: The vehicle may need to be driven for several minutes to set this DTC. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DG . | ||