DTC P0183: Fuel Temperature Sensor A Circuit High
WARNING: This page is about a different variant/trim than selected.
P0183 - FUEL TEMPERATURE SENSOR A CIRCUIT HIGH
| Description: The comprehensive component monitor (CCM) monitors the FRT circuit to the PCM for high voltage. The test fails if the voltage exceeds a calibrated limit for a calibrated amount of time during testing. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Verify the FRT PID value to determine an open or short. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DD . | ||