DTC P0180: Fuel Temperature Sensor A Circuit
WARNING: This page is about a different variant/trim than selected.
P0180 - FUEL TEMPERATURE SENSOR A CIRCUIT
| Description: The comprehensive component monitor (CCM) monitors the fuel temperature sensor circuit to the PCM for low and high voltage. The test fails if the voltage falls below or exceeds a calibrated limit and amount of time during testing. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Verify the FRT PID value to determine an open or short. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DD . | ||