DTC P00CE: Intake Air Temperature Measurement System - Multiple Sensor Correlation
WARNING: This page is about a different variant/trim than selected.
P00CE - INTAKE AIR TEMPERATURE MEASUREMENT SYSTEM - MULTIPLE SENSOR CORRELATION
| Description: This DTC sets when the intake air temperature (IAT), charge air cooler temperature (CAC_T) and the intake air temperature 2 (IAT2) PIDs are each greater than 16.67°C (30°F) different from each other at start up or that each sensor is out of the calibrated range at engine start up after a soak period of at least 6 hours when a block heater is not used. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Compare all sensor readings to the ambient temperature to determine which sensor is reading correctly. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| F-150 3.5L | GO to PINPOINT TEST HN . | ||
| All others | GO to PINPOINT TEST EA . | ||