LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Passive Anti-Theft System (Except Hybrid)) >> Removal And Installation >> Passive Anti-Theft System (PATS) Transceiver >> Removal and Installation

Removal and Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the 3 screws and the lower steering column shroud.
  2. Disconnect the electrical connector and remove the Passive Anti-Theft System (PATS) transceiver.
  3. NOTE: Replacement of the PATS transceiver does not require the PATS keys to be programmed into the Instrument Panel Cluster (IPC) again.
  4. To install, reverse the removal procedure.