SelectShift™ Transmission Selector Lever-SelectShift™ Switch
WARNING: This page is about a different variant/trim than selected.
The SelectShift™ transmission selector lever gives the driver the ability to change gears up or down manually as desired.
- M +
- O/D can be selected.
- Moving the selector lever to M position will allow the transmission to utilize the Manual Mode for SelectShift™ shifting.
- Pressing the SelectShift™ switch (-) on the selector lever, the transmission will down shift.
- Pressing the SelectShift™ switch (+) on the selector lever, the transmission will up shift.
When selecting the appropriate gear in SelectShift™ transmission mode, the message center will display the current selected gear.
The SelectShift™ shift transmission will make some shifts automatically, primarily to protect the engine from stalling.
The transmission will not up shift if the redline is approached and must be shifted manually by pressing the SelectShift™ switch (+) on the selector lever and releasing.