SelectShift™ Shift Transmission Selector Lever-H-Gate
WARNING: This page is about a different variant/trim than selected.
The SelectShift™ shift transmission selector lever gives the driver the ability to change gears up or down manually as desired.
- M +
- O/D can be selected.
- Moving the selector lever to the forward (-) or backward (+) position will allow the transmission to utilize the Manual Mode for SelectShift™ shifting.
- Moving the spring-loaded selector lever forward into (-) in the gate and releasing the selector lever, the selector lever will return to the M position and the transmission will down shift.
- Moving the spring loaded selector lever backward into (+) in the gate and releasing the selector lever, the selector lever will return to the M position and the transmission will up shift.
When selecting the appropriate gear in SelectShift™ transmission mode, the instrument cluster will display the current selected gear.
The SelectShift™ shift transmission will make some shifts automatically, primarily to protect the engine from stalling.
The transmission will not up shift if the redline is approached and must be shifted manually by moving the selector lever back into (+) and releasing.