LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Rear Drive Axle/Differential) >> In-Vehicle Repair >> Stub Shaft Seal >> Installation

Stub Shaft Seal: Installation

WARNING: This page is about a different variant/trim than selected.
    NOTE: Lubricate the new stub shaft seal with grease.
    Fig 1: Installing Stub Shaft Pilot Bearing Housing Seal
    G06065012Courtesy of FORD MOTOR CO.
  1. Using the Front Axle Oil Seal Installer and Adapter Handle, install the stub shaft pilot bearing housing seal.
  2. Install the halfshaft assembly. For additional information, refer to REAR DRIVE HALFSHAFTS .
scientia non olet · About LEMON Manuals