LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Power Transfer Unit (Except Hybrid)) >> In-Vehicle Repair >> Cover Seal >> Installation

Cover Seal: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Assemble the Driver Handle, the Halfshaft Oil Seal Installer and the Shaft Bearing Cup Installer as shown in illustration.
    Fig 1: Assembling Driver Handle, Halfshaft Oil Seal Installer And Shaft Bearing Cup Installer
    G06064379Courtesy of FORD MOTOR CO.
  2. Using the Driver Handle, the Halfshaft Oil Seal Installer and the Shaft Bearing Cup Installer, install the cover seal in the PTU.
    Fig 2: Installing Cover Seal In PTU
    G06064380Courtesy of FORD MOTOR CO.
  3. Install the intermediate shaft seal deflector. For additional information, refer to INTERMEDIATE SHAFT SEAL DEFLECTOR .
  4. Fill the PTU as necessary. For additional information, refer to POWER TRANSFER UNIT (PTU) DRAINING AND FILLING .
scientia non olet · About LEMON Manuals