System Airflow Description - Electronic Manual Temperature Control (EMTC): Panel

When PANEL is selected:

• the RECIRC request button is enabled. If the RECIRC request button is selected (indicator ON), the air inlet door actuator closes off outside air from entering the passenger compartment. If the RECIRC request button is not selected (indicator OFF), the air inlet mode door actuator admits only outside air into the passenger compartment.
• the defrost/panel/floor mode door directs airflow to the instrument panel A/C registers.
• blended air temperature is available.
• the A/C request button is enabled. The A/C compressor can operate and the indicator will illuminate if the A/C request button is selected and the outside temperature is above approximately 6°C (43°F).
• the blower motor is ON.