LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Automatic Transaxle (AISIN Aw21)) >> Disassembly And Assembly Of Subassemblies >> Torque Converter Hub Seal >> Disassembly

Torque Converter Hub Seal: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transaxle. For additional information, refer to TRANSAXLE  .
  2. Remove the torque converter.
    Fig 1: Location of Torque Converter
    G06264090Courtesy of FORD MOTOR CO.
  3. Using the Input Shaft Oil Seal Remover and Slide Hammer, remove the torque converter hub seal.
    Fig 2: Removing Torque Converter Hub Seal Using Input Shaft Oil Seal Remover And Side Hammer
    G06264087Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals