LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Automatic Transaxle (AISIN Aw21)) >> Disassembly And Assembly Of Subassemblies >> Torque Converter Hub Seal >> Assembly

Torque Converter Hub Seal: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Position the torque converter hub seal in place.
    Fig 1: Location of Torque Converter Hub Seal
    G06264088Courtesy of FORD MOTOR CO.
  2. Using the Fluid Pump Seal Installer, install the torque converter hub seal.
    Fig 2: Installing Torque Converter Hub Seal Using Fluid Pump Seal Hub Installer (307-548)
    G06264089Courtesy of FORD MOTOR CO.
  3. Install the torque converter.
    Fig 3: Location of Torque Converter
    G06264090Courtesy of FORD MOTOR CO.
  4. Install the transaxle. For additional information, refer to TRANSAXLE  .
scientia non olet · About LEMON Manuals