LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Automatic Transaxle (AISIN Aw21)) >> Diagnosis And Testing >> Transaxle Drive Cycle Test >> Before Pinpoint Tests

Before Pinpoint Tests

WARNING: This page is about a different variant/trim than selected.
NOTE: Prior to entering pinpoint tests, check the PCM wiring harness for correct connections, bent or broken pins, corrosion, loose wires, correct routing, correct seals and their condition. Check the PCM, sensors and actuators for damage. Refer to the INTRODUCTION - FUSION HYBRID AND MKZ HYBRID .
NOTE: If a concern still exists after electrical diagnosis has been carried out, refer to DIAGNOSIS BY SYMPTOM  .

If DTCs appear while carrying out the on-board diagnostics, refer to the DIAGNOSTIC TROUBLE CODE (DTC) CHARTS  for the appropriate repair procedure. Prior to entering pinpoint tests, refer to TSBs for transaxle concerns.

scientia non olet · About LEMON Manuals